It's seems to work fine after renaming the file, rebuilding the application, and editing the web.config file to point to login.aspx. It looks like I can use your fine product and thanks again for the help. It was unusually easy. Merry Christmas…

Hi Chris

I've just recently purchased ASPBanner and have been testing out serving multiple Tradedoubler code using the IFRAME method. I have four types of banner on the same page refreshing every 15 seconds. (this will change on the live site) 

I've been leaving the IE page up for x hours and coming back to find between 1-3 of the banners has stopped and in place is an "internal error".

BannerZone=3&Refresh=15|40|800a0046|Permission_denied 80

I thought it may have been the SQL permissions from one of your other messages so I gave the banner user the DataReader and DataWriter permissions.

Its still happening and around the same time in the logs theres a couple of file not found errors.

BannerZone=2&Refresh=15|23|800a0035|File_not_found 80 - 80.65.240.159

BannerZone=4&Refresh=15|25|800a0035|File_not_found 80 - 80.65.240.159

BannerZone=1&Refresh=15|25|800a0035|File_not_found 80 - 80.65.240.159

Any ideas? I'm hoping its not the server as there is currently only 2 sites on it and this is pretty much the only traffic.

Thanks

Colin

Well. fontpage publishing is evil. That you have found out.

Do not use it. It usually wont work right when running asp code locally and also at the server because of differences with the paths and virtual directory structure. etc etc etc

You can definetly use frontpage to connect to the web site live and drag and drop files into it/edit them... but the sooner you stop using the publishing feature the better off you will be.

5 Computers in an office, random hardware and operating systems.  Some wireless some wired - all the same ISP connection.

Some users do not see the PLACE A NEW AD hyperlink.  How can this be hidden?  There is no conditional statement yet some see it and others don't.

To make this problem even more confusing if I take an image and put the place_new_ad.asp hyperlink on that image the users don't even see that image any longer.

How can this be resolved?

Our webhost set the permissions, but the error is still there, so that is obviously not the problem.  We now have both our webhost and our asp support technician trying to figure out the problem and everyone is stumped.  Can you please provide us with the following information to help us out:

1) what is the name of the file that sets the connection string?

2) what is the name of the file, if it is different from above, that sets the password of the database?

thanks

like I said you made changes to something to cause that...

users/user_area.asp

runs fine the way it ships "it is one of things I tested earlier when I looked at your installation for you"

If you want I'll go look via FTP and tell you what is wrong

expiration dates are not used in aspprotect's database when signing someone up using PayPal subscriptions because the PayPal system keeps track of all of that and will automatically send posts to the approtect system if a user needs to be deactivated for not paying or for whatever reason.

As you will notice in that thread about subscriptions the paypal signup data you use for the person determines their membership pricing and details..
http://support.cjwsoft.com/forum/forum_posts.asp?TID=186& ;PN=1

Basically the system takes care of everything.
PayPal takes care of everything.

However you want to look at it.

Hello,

I have ASPprotect 7 installed on my remote server.  I am able to go to the examples/default.asp page and login in without any difficulties.  If I copy the code from that page and paste it in a new page called the same thing but in a different folder, I get this error;  (Keep in mind that this is essentially the same exact page in a different location of the website)

Error Type:
Active Server Pages, ASP 0126 (0x80004005)
The include file '../../check_user_inc.asp' was not found.
/aspprotect/Pages/default.asp, line 3

I get the same error if I paste the "protection code" I have generated into the top of a current (.asp) page in my site.

Basically, the only pages that work are the ones that came with the program as examples.  Thats great, but now I need to make it work for my pages.  Any thoughts?

did you fix it because I see all the pictures just fine ?

http://mcintoshcounty.org/real_estate/view_item.asp?Ad_ID=1

There was nothing wrong with the server configuration. It turned out that the problem was that I disabled the email notification of new user registrations that I continually receive. That appears to disable the authorization email to new users as well.

One other issue. It appears that AOL email addressee's are not getting the authorization email. Does AOL have any blocks to CDONT generated emails?

Thought that was already done....

Back to the drawing board...

I need a point or a little insight please.

I need to get information from a credit card authorization called netbilling. I have been looking at your code for PayPal and 2 checkout. I have a feel for the code flow and the relationships of the "includes" .

I have been doing a lot of reading in my books and am seemingly twisted around the axel. I am not expert in ASP I am better in VB. I am not afraid to write code I am just a little nervous about messing up existing relationships.

My plan is simple: code a page to open the database and populate the database fields from netbilling and convert their field name to yours in the database.

I appreciate your time and insight. As in the past I need your help again.

Thanks

not really, aside from looking in paypal and manually adding each one for each user...

how many users are we talking about anyway ?

and were any of the users new sign ups from scratch because if they were and that field didnt get populated that is weird?

ultimately aspprotect does not use that field. I was just storing it for the sake of storing it... so its not a big deal but I would still like to figure out what is going on

removing the expiration dates from paypal subscripbers will be enough to fix the issue your having about them getting the expiration notifications

trust me, they (serverobjects) do not check processors.. as a matter of fact they haven't answered support emails for about 3 years. All they do is sell those components like hotcakes and take in mad crazy cash. But I will say the stuff does work well and always has. (that guy probably took all the money he made/makes from those components and took off to Jamaica or something sitting on the beach drinking margaritas)

regardless,
ASP just cant resize pictures on it's own.
It' just not possible. You need a 3rd Party component.

There isn't much to say about the ASP.NET thing.

If your server has ASP.NET installed (meaning you can run aspx pages on your server and the ASP.NET framework is installed) and running you just pick that option in the config file and ASP Photo Gallery will use ASP.NET to make dynamic thumbnails for you.

To run ASP.NET it must be a 2000 or 2003 server.

Line 409:
Line 410:
Line 411:		<authentication mode="Forms">
Line 412:			
Line 413:			<!-- DO NOT CHANGE UNLESS INSTRUCTED TO DO SO -->

No I didn't...

The one I tried is the hosted one at my provider which I gave you the link for.

Thanks very much.  I will get that one and it may be much easier if I need to get into the Nitty Gritty of the database at some time.

Thanks

A very common and extremely bothersome error encountered when running ASP apps that connect to a database is the "80004005" error. It comes in many varieties.

These articles cover it.


(an article I wrote)
http://www.powerasp.com/content/hintstips/permissions.asp

(more articles)
http://www.aspfaq.com/show.asp?id=2009

http://support.microsoft.com/default.aspx?scid=kb;en-us;3065 18

http://www.aspfaqs.com/aspfaqs/ShowFAQ.asp?FAQID=115

http://www.macromedia.com/support/ultradev/ts/documents/8004 005_cannot_open_unknown.htm

It happens at least once per hour or every time a banner is edited in the system by the admin.

Changing its frequency would be somewhat complicated. You'll have to make changes to the code in a few places and you will effect performance adversely by doing it more often as it will mean a lot more database queries which defeats the purpose of doing it once per hour to conserve resources. The reason is when you change the frequency of that you also change the frequency of the entire banner application variable caching system. It difficult to explain but it unlike most banner systems out there it basically fetches banner rotation info every so often instead of every single time your page needs a banner. It stores this rotation and cycling information in ultra fast application variables. The docs actually go over a little bit of how that process actually functions under "using the system / Setting Up Banners
"

Its a customization I just can not support and I do not recommend doing, but if you really want to you should look at the "aspbanner_inc.asp" file

this is the part that makes it happen at least once per hour (requires visitors to your site to happen obviously)... you'd have to cleverly recode it to work slightly more often

' Checks the time the banner data was last updated and basically updates it if an hour or more has passed
If Cint(Application("BannersLastUpdated")) <> Cint(Hour(time)) Then
%>
<!--#INCLUDE FILE="appinfo_inc.asp"-->
<%
End If

There may be more to changing this than that, but this is all I can tell you.

Noted:
I actually did not think you did.

As far as debugging goes.. thats all built into visual studio.net.
There is a tag you edit in the web.config file to enable project debugging
http://support.cjwsoft.com/code/moreinfo251-1.htm

Like I said though for changes to ASPProtect.NET I'd start off from scratch and stick with vb.net... using the visual.studio.net interface is not really vary hard to remove and change things you dont' need even if you are a C# coder. Especially simple stuff like you mentioned.

This is the 1st time anyone has ever told me they had any issues with the import process so I need more detailed information.

What upload component/method are you using ?
Are you using an image resizing component ?
Have permissions been set on the import folder ?

And lastly..
Can I see this happening ?

If not please put it on a live server where I can troubleshoot it for you.
Like we say on our site.

In some cases in order to receive proper tech support your application will be need to be installed on a live server on the Internet. We simply cannot troubleshoot all issues when the application is only installed on your local machine. We also may require access to your server in order to troubleshoot any issues.

It really means just what it says. Your connection string is just not valid and the sql server speicifed can not be reached. The username and password could also be invalid. Since you already had a database set up you should use the same username and password you have always been using. You also need to use the same database name you have always been using. Without actually knowing more and seeing what you are doing it is pretty hard to tell you anymore than that.

The directions and sql scripts given are for setting up a new sql database. Applying them to an existing sql database requires a slightly different approach. Modificiations to the SQL scripts elimintating references to the usernames/password/database we suggest in the scripts is also a good idea.

A data connection is a low level as it gets. Until you get that working you are really not even touching any of the code in the ASPListings application.

If you want I have no problem going into your sql server and web and setting up for you correctly.

The Double DIM needs to be removed for this code to work properly.

<%
Dim BannerZone, BannerConnectionString, BannerDatabaseType, ConnBannerSystem
Dim CmdCheckUser, CmdGetConfiguration, App_Name, Config_SQL, BodyTag, BanDataConn
Dim CmdBannerTemp, CmdGetZones, ZoneString, ZoneArray, ZoneIndex, CmdUpdateWaiting
Dim CmdUpdateExpired, CmdRetrieveImpLimitedAds, CmdRetrieveImpressions
Dim CmdUpdateImpHit, CmdRetrieveAds, CycleBannerTotal, CycleList, NewCycleList
Dim Dim LoopBanner, CycleLoop, CycleListArray, CycleListArrayIndex, BannerCycleData
Dim Banner_Array, CurrentBanner, NewCycleListArray, Banner_Array2, LocationIndex
Dim Stop_Processing, Keep_Processing, CmdUpdateStats
%>

More Upgrade Info

To upgrade an existing ASPBanner system please follow these steps.

Back up your old system completely before starting.

Install the new system per the installation instructions that came with it.

Once it is running simply use your old ASPBanner database with the new system.

You may also want to keep your banner images folder from before in the same location so your existing banners still link to valid image urls because the new system stores banner images in a new location.

Since the config table in the database is no longer used you will need to go to the settings screen of aspbanner again and configure things. The config table in your old database can be deleted or left alone. It won't be used anymore so it does not matter either way.

That is all there is to it. If you have any issues please ask in the forums and we will help you out.

Chris -

Long time no talk, which is a good thing.  I have purchased another product from you, ASPVendor.  I am running into an issues.

When I try and remove the image through the image manager, it does not remove it.  Screen shot attached.

2005-10-19_194248_image_upload.zip

Thanks

I just added this line to the paypal1.asp page

<input type="hidden" name="currency_code" value="CAD">

and it worked.  Clearly other values can be entered for other currencies.  Everything was listed in this manual https://www.paypal.com/en_US/pdf/subscriptions.pdf.

Cheers
Roy

The links to view that info are on the main users screen of the admin area.

Down below...

They wont show up unless you have that stuff enabled in the settings screen as well.