Home | Advertising Info131 USERS CURRENTLY ONLINE   
PowerASP
   Site Search Contact Us Sunday, August 18, 2019  

Active Server Pages asp search engine active server page asp application components tutorial CJWSoft ASPProtect ASPBanner ASPClassifieds



Blog Entry: 3/25/2006 2:39:19 PM

I am not talking about image resizing. I need to know if it is possible to limit the upload to images where their height or width is less than 500 PIX. ,

in Control_pic.asp is there way to wrap the description field so that it doesn't go outside the table.

 

Thanks

,



Flash files cannot track clicks unless you edit the original flash file to link to the aspbanner system redirect URL.. feeding it the correct ID of the banner.

When that link is clicked on it will then track the click and redirect the user to the “link url” specified for that banner. 

The system actually generates the necessary ASPBanner URL for you. That link is shown on the banner edit screen.(you must save the banner at least once and come back to that screen to see the link though) 

Really the best way to show it is with an example as seen below.



Basically the flash banner file "powerasp.swf" highlighted in green needs to be edited to link to the banner redirect url which is highlighted in red.... the banner redirect url will then track the click and ultimately send the user to the Link_URL highligthed in blue.

All banners systems work this way when it comes to flash files.
It’s the nature of flash and the web browser, 

The flash source code must be edited to link to the redirect url in the ASPBanner system. There is no possible way any banner system can track a flash click unless the flash file links to the banner system 1st.... because that click is handled by Flash and the web browser. 

In some cases if you do have the original source file for the flash banner then you are out of luck as far as tracking clicks goes.



On a side note... if you create flash banners the way this article says you can actually feed a .swf flash file a link for it to click to. Instead of it being hardcoded.

http://www.macromedia.com/resources/richmedia/tracking/desig ners_guide/index.html

This is really the way everyone should design their flash banners from now on because the url it links to can be easily changed at any time without editing the flash file source code. 

cwilliams38085.095150463, Just copy the files over. have permissions set on any folders that need it, and edit the data connection so it's valid for the new server. Once you get logged to the admin area go update all the settings so any urls are valid.

really its no different than a new installation so just follow those directions but use your existing files.

There is no domain pointing involved...

As logn as the old stuff is not accesible on the live internet you don't need another license.

As for my installation fee of 25. That is only for new installations. I charge more for something like that as there may be compications such as custom changes to the code that I would have to deal with. Customers often custimize the login and users area.. etc etc .. and there may be hardcoded urls and what not to worry about changing.


LASTLY, I noticed all your other posts are in the ASPProtect 7 area so the installaton process for that is a bit different than for Version 6 so what I said above is not quite the same process. Please make sure you post in the correct area when asking questions. ,

Our home page is not showing up gives this error:

Active Server Pages error 'ASP 0126'

Include file not found

/Default.asp, line 246

The include file 'elib/articles/home_feature1.asp' was not found.

,

Great Thank you!

As of thus far the program is working rather nicely.

I am very impressed :)

,

People who have the option pack have a new feature called groups.

Groups are meant as a replacement for using the access levels as they are much more powerful. Support for pages protected using access levels is left in tact for backward compatiability for a customers older protection code.

A customer recently told me groups could not be used like access levels and that 8 access levels was not enough. This is how I explained that groups can do everything access levels can do.



Groups can honestly do everything access levels can do if you really think about it.
Using groups and protecting pages accordingly you could actually create a system that basically worked identically to the way the access levels works.

For example..

You make 8 groups and assign users to them accordingly


Protection code on page allows access to groups 1-8
The aspprotect system generates this code for you…

<% GROUPACCESS = "1,2,3,4,5,6,7,8" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

In this case a user assigned to any one of those groups would have access..

 

Protection code on page allows access to groups 2-8
The aspprotect system generates this code for you…

<% GROUPACCESS = "2,3,4,5,6,7,8" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

In this case a user assigned to any group between  2-8 would have access..

 

Protection code on page allows access to groups 3-8
The aspprotect system generates this code for you…

<% GROUPACCESS = "3,4,5,6,7,8" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

In this case a user assigned to any group between  3-8 would have access..

cwilliams38114.800775463, With ASPVendor you must use the SQL scripts we provide with the SQL Version to create the SQL database or else fields will not get set correctly.

I wish you would have told me you were using SQL server. It's important details like that that allow me to help and troubleshoot. ,

enjoy the bar.. drink one for me.. cause that was the problem..

 

,

Wondering what might be causing a long delay to display the login screen?  This does seem to be intermittent.  Could be server/ISP related? Have experienced enough times to justify posting this question.

I can count up to 20 seconds after clicking on the link.  After login all other selections zip right along without problem.

http://gibsoncity.us/aspbanner/

Thanks, Lance

lancem38319.6117939815,

I want to try this on the machine im using now; which is windows XP.

Is this possible? I don't think i can set folder permissions on XP... there is no option to do so...

Is there a way to do it?

,

ConnectionString = "DBQ=C:\TradersReportsCom\aspprotect\data\database\ASPProtec t_access2002.mdb;Driver={Microsoft Access Driver (*.mdb)};UID=Admin;Password=temp"

I have already set the folder permissions as indicated in the documentation.

,

 

I am successfully using ASP protect on our site. I have one question:

The file Check_user_inc.asp looks a bit bland as I can't seem to use the sites Dreamweaver template. If I apply a template to this page, it is duplicated on other pages with this template.

How can I apply a template to this page?

Thanks

Clark

 

 

,

I recently upgraded my ASPclassifieds from MS Access to SQL.  The application launches, I can browse existing catagories, etc. but when I try clicking on the login, guestbook, register or accessing the classifieds_admin,  I get the HTTP 500 - Internal server error.  Guessing this must be a folder or file permission issue?  Have tried changing IUSR permissions but nothing helps.

Please advise.
Thanks, lancem

,

I am running Windows 2000 server. I do believe asp.net IS installed as I have the .NET 1.1 framework installed.

Funny about the bounce backs. I am at about 10% of my limit, which I control as I am the network admin. I'll check into that.

,

Ok nevermind that... i got by that wasn't paying attention...

The problem is even before this which i didn't know until now.

I placed the protect tag in a page i called members.aspx

When i go to this page is says ACCESS DENIED etc etc etc.

When i go to login to view this page i get the error..which i DIDNT know because i assumed it was working. This is the error im getting:

Server Error in '/MAP' Application.

The resource cannot be found.

Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable.  Please review the following URL and make sure that it is spelled correctly.

Requested URL: /map/users/aspprotectlogin.aspx


Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42

 

btw it says /map because that is the subfolder within the root folder

,

Not really.  The way I thought activity would work is that I would always see the last 50 users.  Not sure what controls that and why I wasn't seeing it, but it sounds like it is an IIS thing and since my site is not all that busy, it will not show the users if some process has reset the numbers.  Not a big deal.

As for the log files, I think it is related to my other question regarding the export directory.  I have the ISP looking into things at thier end to see if they are doing anything that could cause the directories to disappear.

Thanks,

Dave

,

I downloaded v7 3/7/2005

 

I entered a password that was supposed to be all caps with only first letter caps. 

 

it is odd, if I go to other user and enter wrong password that does not come up.  it apprpriately goes to a screen that says Access Denied.

thx

,

There are several pages on my website that a user may go to that are not protected (e.g. home page).  If the user has indicated that they want to be saved on this computer (until they explicitly log off), and their 1st entry point is to an unprotected page, how do I determine whether they have logged in before, and extract the info from the cookie / session variables without forcing them to log in or making the entry page protected?

 

,

Really awesome, thanks..

If possible please be sure to respond to the email they send so the review ends up authenticated

 

 

, That is by design and how it is designed to function.

There is no easy way to do what you are asking about.

Can it be done ?, sure!!

But it is a lot of custom coding to sort it all out and not something we support.

If I were you I would simply edit the login box screen to show some hyperlinks and options should a person need to use them. ,

The Read-only attribute i was referring to is at the windows explorer level when looking at the folder properties under the general tab. 

ASPNET and IUSR have full access to the _database folder as you suggested - Yet still I get the permission error noted above.

, After you click the link in the confirmation e-mail you are directed to the Thank you page.  Right above is a sign in link.  When I click this I get that funky error message.

I am trying to integrate  the scripts with the look of my site,  if that is what you mean by changing things around too much.  But, I don't think I have done anything out of the ordinary.

Cheers,
Roy
,
That's excellent!
 
I did learn that parent paths were disabled on my test 2003 server...
 
But on the hosted server, it looks like parent paths are supported as I change the file location of the language file in the forum common.asp as such, and obviously moved the file as well:
 
from:
<!--#include file="language_files/language_file_inc.asp" -->
to:
<!--#include file="../language_file_inc.asp" -->
 
Everything seems to work fine and I thank you very much for you quick response!!!
 
Ok, time to buy...thanks again!
 
- Jason
 
,

Christopher,

Thanks for the reply. I think I've found my problem, but can't test until later in the evening as it is on a live site.

Darrell

,

It's not normal at all. My guess you accidently edited the code in a bad way.

(thats the same code the every guestbook in every application I sell uses including ASPGuest which gets downloaded for free about 50 times a day)

No one has ever said it acted funny.

I would do a default installation with the original code somewhere and see if the problem occurs. If it does I can take a look.

In the meantime I wouldn't be running that as it is probably using up massive processor time because of whatever is wrong with it. 

cwilliams38454.954212963, Awesome -thanks - I'll give it a try  ,

A mod like this would improve tracking by leaps and bounds.

Do you think this addon would be availalbe anytime in the near future? If/when this feature or mod becomes availalbe, it certainly would be ideal if some script was made to import all the log file data.

,

[QUOTE=cwilliams]
Is that a real term or just something you named it cause they have like a zillion people using that SQL server?[/QUOTE]

yeah thats it, you buy into a part of the sql server so it's an sql server hotel...

, Oh, to clarify the above.  We did not change any columns in your [Users] database or any other table., Not the way it ships. You would have to add that functionality by editing the source code and database.,

Sounds cool.. post info when you get it sorted out

thx

hopefully someday I'll get the new version finished.. I just never seem to have time. Lately ASPProtect takes up all my time and now aspclassifieds seems to be in need of a new version more so than asp photo gallery

 

,

Chris -

Long time no talk, which is a good thing.  I have purchased another product from you, ASPVendor.  I am running into an issues.

When I try and remove the image through the image manager, it does not remove it.  Screen shot attached.

2005-10-19_194248_image_upload.zip

Thanks

,

Update..

I have support for the ibulc image uploading client working.

http://www.ibulc.com/

There is also an option in asp photo gallery pro to store the images original filename in the description field which is pretty cool.

Ibulc client bulk upload support currently only works with the pure vbscript upload or the safileup component. (I may support the other two components asp photo gallery can use but it really depends on time) The pure vbscript upload code I am using for this is much better than the code I was using before so that method should be offer decent performance for anyone though using a component is always better.

I still have to add the ibulc feature to the users side. It currently all only works for an admin user.

The whole process is very cool. You install the ibulc client on you computer. It's tiny, and free for uploading up to 10 (100kb) pictures at once. You have to by a domain license from them to do more than 10. Anyway.. it lets you select multiple pictures off your hard drive and it then uploads them all at once with individual progress info for each picture. Its really cool and since it really treats each picture as an individual upload it doesn't hammer the server with one big upload at once.

I also made it so you can start the picture uploads at any picture number.
So if you already have pictures in an album you can add more without losing what is already there.

This was one of the main features of the new version and now that it is working hopefully I can tie up any loose ends and get the new version out soon.

cwilliams38327.5488541667, Can I suggest you have changed a code to stop this or you have a privacy software stopping your visits to add 1 to the counter. Has anyone tried to visit the album or just you. If you send me the link I can sus it out for you, Has this been resolved ?, A nice addition for the listing script would be if the script would allow a "featured ad" or ads that would appear on the default page. ,

Are you reffering to the number of the left of the users name in admin.

I thought it was a counter at first but that number only displays the number of albums they have set up.

,

I set the max image width to 1000; previously it was null. Now I'm getting server errors:

page not found, then, service unavailable (the page is there). But in a new album, the images imported fine and it seems to be working now, despite the IIS issues.

I think my host restricted the amount of memory and resources my site is allowed to use.

, OMFG,


Timecard Entry: 3/25/2006 2:39:20 PM

Howard, Peggy - Herald Furniture, memorial day, Ordered 2611 for WDT as per Randy, there were two sent one up to randy, 3 computer lockups today..., DIRP, Domain work, switched a couple around, turned one off, set two up...., w/Jim Gilbert, work on the phone for forst time, teched calls - slow, Sun and Shield - site layout in Photoshop for showing, E-mailed expired users for yesterday and today, sorted and filed feedback forms, and did AUQ e-mails., THOUSANDISLANDS BRIDGE AUTHORITY ADD PAGE AND CONTENT, ALSO ADDED TO NAVIGATION, Working on virtual domains., Install Emerald & SQL on new system & Misc., Reading and responding to emails, investigating possible DNS problem concerning ogdensburg.org and stlawrencegas.com, Same as before, tri state show dinner with dutches county, Gisco Investors., Study ASP and ADO, answered calls, mailing, call backs, still pretty busy here till about 10:45 when it died right down..., Took in just 1 call for billing. Emptied all the trash and cleaned up a little. Searched the web for some good sites for gary in regards to tech support training., toning out cat 5 lines to determine their origins and installing my extension as well as Randy's extension in the Tech Room in the basement., Started doing last week's billing., Had a wholesome meal consisting of Sesame Chicken and rice Mmm mmm good., Softmls.. working on pocket real estate , personal, post office, Jeff Cooper re: email problems,

   Active Server Pages Rule The World
Contact Us  
All artwork, design & content contained in this site are Copyright © 1998 - 2019 PowerASP.com and Christopher J. Williams
Banner ads ,other site logos, etc are copyright of their respective companies.
STATS Unless otherwise noted - All Rights Reserved.

Active Server Pages ASP control controls class classes module script Scripts applet CJWSoft ASPProtect ASPBanner ASPClassifieds www.aspclassifieds.com, www.powerasp.com,www.cjwsoft.com,www.aspphotogallery.com,www.codewanker.com,www.aspprotect.com,www.aspbanner.com