Home | Advertising Info97 USERS CURRENTLY ONLINE   
PowerASP
   Site Search Contact Us Thursday, October 17, 2019  

Active Server Pages help tutorial how to ASP Help ASP Tutorials ASP Programming ASP Code - ASP Free CJWSoft ASPProtect ASPBanner ASPClassifieds



Blog Entry: 3/25/2006 1:50:18 PM

I dont know. Perhaps a fresh installation in a new folder would be a good idea as well if possible..

for troubleshooting sake..

, At the bottom of my "users" list page, it asks the question "number of users displayed per page"?  After hitting a larger number than the default of 1-25, it increases the number of users per page to that number.  But as soon as I leave that page, it goes back to the default.  Any thoughts?,



Do what it says so you can see the real error and then post that information here. It could be anything from incorrect permissions to whatever.cwilliams38454.4272916667,

I really do not know.. maybe it is a conflict with something else..

I run many instances of aspbanner on my servers and I have every item to log enabled for my iis log files... my stats server software which reads those log files (livestats and smarterstats) have never reported any 404 errors related to (aspbanner/those images)...

I do not know what is happening in your situation..

sorry.

,

If you have found out that parent paths are disabled on the web server you can still use the application.

Before you continue.

If it is your server consider enabling parent paths to solve the problem.

If it is not your server consider asking them to enable parent paths for your web site to solve the problem.

If that is not possible please download this zip file.
2005-02-20_150703_aspprotect_v7.x_alternate_include_file_pat hs.zip

This zip file contains 3 sets of alternate files depending on your situation. You simply replace your existing aspprotect v7.x files with these new ones.

The zip file contains the following folders and files.



Below is the contents of the readme.txt file which explains everything.

The following folders each have a version of all the files in the ASPProtect system that might need to be edited in case you need to change the paths for the server side include files. There are 3 different scenarios.


(parent paths enabled) - This is the way the application comes.
The files in this folder have FILE server side includes containing "../" information. While these includes will work when the applicaion in is any location of a website they will not work if parent paths are disabled on the web server. Generally you will want to use these on your xp development machine. You can of course use them on your real server if parent paths are enabled. Parent Paths are now disabled on II6 by default and some hosting company will not enable them.


(domain root)
The files in this folder have VIRTUAL server side includes in them.
These includes only work when the applicaion is installed in the root of your web domain. For example if your domain was called "www.somedomain.com" the following aspprotect files and folders would end up like this
"http://www.somedomain.com/check_user_inc.asp"
"http://www.somedomain.com/password_admin"
"http://www.somedomain.com/users"


(domain directory)
The files in this folder have VIRTUAL server side includes in them.
These includes only work when the applicaion is installed in a directory called "aspprotect" in the root of your web domain. For example if your domain was called "www.somedomain.com" the
following aspprotect files and folders would end up like this
"http://www.somedomain.com/aspprotect/check_user_inc.asp"
"http://www.somedomain.com/aspprotect/password_admin"
"http://www.somedomain.com/aspprotect/users"

You can change the name of the "aspprotect" directory but you will will have to edit the includes in the files.


Lastly, if you are on a local machine and insist on using the VIRTUAL INCLUDES you would also use the (domain directory files) even though you dont have a domain on your local machine most likely
For example if your site was installed like so.
"http://localhost/aspprotect/check_user_inc.asp"
"http://localhost/aspprotect/password_admin"
"http://localhost/aspprotect/users"


cwilliams38403.6836342593, Hello dear Chris

I can login for the first time. I exit from the browser and then I cannot login again. This happens for every user.
I noticed that the values in the fields "Login_limit" and "Active" in the ASPP_Users table in the SQL changed to NULL and 0 when login and remained in those values after close the browser.
If manually I change the values it is ok but the problem repeated.
Thank you in advance.
, like I mentioned are you by chance running something like Norton Antivirus Script Blocking ?? That can cause timeouts and all sorts of problems with ASP as can other software like it. ,

I set the max image width to 1000; previously it was null. Now I'm getting server errors:

page not found, then, service unavailable (the page is there). But in a new album, the images imported fine and it seems to be working now, despite the IIS issues.

I think my host restricted the amount of memory and resources my site is allowed to use.

,

Hi

I have purchased the Standard version about a week ago. Its a great script.

I have been able to select  uploaded banners from day one... but just now i dont seem to be able to select...

i know its hard for you to trouble shoot with such little information.. but i had to ask..

Should i maybe upload the site again ( but same the database first)?

regards

Domenic

Sydney, Australia

 

,

((TITLE EDITED BY ADMIN))


it would be nice if there was an option for login abuse, where a login account would be flagged if it logged in from x number of different IPs over a period of time. I know many have dynamic IPs, but there's got to be a balance between legitimate logins and logins that are 'shared' for the sake of saving money (I sell subscriptions), in the end costing me.

Maybe searching the first two number groups in the IP (example, 209.168.*.*), and if finding more than an admin specified number of logins per week from IPs with different first two groups, the record would be flagged or locked...

 

,

This has not been officially released yet, but it is ready.
Here is the overview...
http://www.aspprotect.com/demo3/paypal_signup2/overview.asp

And the Code for the IPN Subscription Pack is 30.00.
http://www.aspprotect.com/ipn_subscription_support_pack.asp

A few people are using it and say it works very well.

Like the IPN Single Purchase System it is a separate directory you copy into the web site. One change must be made to your database so it’s pretty easy to get working. 

Though I am not guaranteeing this you should be able to accept Single IPN payments and IPN Subscriptions at the same time without the two bothering each other. I haven’t tested it but one customer is doing it and said it is working fine. It just involves manually specifying the IPN URL for one of the systems so it overrides the default IPN URL on your paypal settings. (As each system needs its own IPN URL) Its easy to do… just a form field you would add to the subscription form. I already looked it up. See below. 

Specifying Your Notification URL

If you only need to receive your IPNs at a single URL, you can enter that URL in the Preferences section of your Profile. If you would like to receive payment notifications for different payments at different URLs (i.e. if you need to separate payments made to different websites you run), you can manually pass the IPN URL with each payment by including it in that payment’s HTML code. Use the notify_url field to pass this information. The notify_url for a specific payment will be saved, and any subsequent updates to that payment (e.g. cleared eCheck) will be sent to that notify_url. When you pass a notify_url in your HTML code, it will override any preferences you set in your Profile. 

Anyway.. the Code for the IPN Subscription Pack is 30.00.
http://www.aspprotect.com/ipn_subscription_support_pack.asp

 

cwilliams38342.8775578704,

Upgrade from V6 to v7.x with an MSACCESS DATABASE

1st of all, backup your existing ASPProtect files and database before performing this upgrade. Please be really careful while performing this upgrade. Version 7.x  is a highly advanced application compared to any previous versions. CJWSoft under no circumstances is responsible if you lose information or have website downtime.

BOTTOM LINE: (PERFORM THIS UPGRADE AT YOUR OWN RISK)

To do this upgrade you're going to need to have the Microsoft Access Application.
To work with an Access .mdb file it can not be newer than the version of Microsoft Access you are running.

That being said, on with the upgrade..

Open you're existing Acccess Database up in Microsoft Access..
You should see this something like this.



By right clicking on then choosing rename
Rename "Users" to "ASPP_Users"
Rename "Groups" to "ASPP_Groups"

If you do not have a "Groups" table do not worry about it right now.

Now right click and DELETE the Config Table.
Yes, delete it..

You should now see this. (with or without the "Groups" table)



Now, right click on "ASPP_Users" and go into design view.
It should look like this.


Rename the "Password" field to "Old_Password"
Be sure to spell it perfectly using the Underscore
It will look like this.


Now scroll down to the bottom a bit It should look like this.



Now..

If you have a "Groups" Field... leave it alone
If you do not have a "Groups" Field add one and make it a memo field.

Now, we are going to add a few more new fields.

Add a field called "Redirection_URL" make it a "text" field with 150 field size
Add a field called "PayPal_Subscriber_ID" make it a "text" field with 100 field size
Add a field called "Newsletter" and make it a yes/no field
Add a field called "Password" and make it a "text" field with 100 field size

It should now look like this.
(you do not need to worry about the field descriptions.. that part is optional and only seen when working on the database)



Now close that window and save the changes..

Your now going to open up another Access Database while still leaving the one you have on your screen open. You going to open up one of the new databases that came with v7.x. This database has some info we are simply going to copy and paste.

You'll want to open it and put it side by side on your desktop like so.
(the old database is on the left.. the new one is on the right)



Now, for the fun part.

On the new database to the right.. right click on the "ASPP_Config" table and pick "Copy"

Then move your mouse over to the old database on the left. Right click in the open white area and click "paste"

It will ask you for a database name. Type in "ASPP_Config"
Leave "Structure and Data" checked and hit OK

Your old database on the left should now have a nice new "ASPP_Config" table.

OK, now for the "ASPP_Groups" table

If you already have a "ASPP_Groups" table in your old database you are done.

If you do not have one your going to copy and paste the table from the New Database to your old database just like we just did with the "ASPP_config" table.

Your old database should now look like this.



Now, you are done upgrading your database from within Microsoft Access.

The existing passwords still have to be encrytped and moved from the "Old_Password" to the "Password" field

To that we have a special page we run in the application that will take care of that.

So, for now... go install the application, but using the database we just created.
Follow these instructions for the most part...
http://support.cjwsoft.com/forum/forum_posts.asp?TID=181& ; ;PN=1

When you get to the part where you finally get into the admin area and need to make an admin account you will notice that your existing user database is there but none of the users have passwords if you look at them in the edit screen.

That is normal. Simply do what the instructions say and create and admin account using a username that does not exist..

Then log off... then back in as that new admin account. If that works you are ready to convert the passwords.

This part is very easy.

You want to run a special page via the browser.

http://www.mysite.com/password_admin/convert_to_encrypted.asp

Replacing the part in blue with your website info.

Once you get the page running you will see a login prompt and one form field just like before with the "get_me_in.asp" page

You will need to paste the "PasswordEncryptionKey" value that you used in the "config_inc.asp" file in the form field and hit enter.

If all goes well you will see a page telling you to click here to encrypt the passwords and copy them over.

So do what it says... dont click more than once and wait.

Eventually it should say it is finished. So go log in to the admin area of the system using the new admin account.

Now edit some users but dont save... you want to see if the passwords are showing up. If they are the conversion worked. If you see nothing or a garbled mess it did not work and you made a mistake during this whole process.

If things went well backup and delete the conversion file below.

http://www.mysite.com/password_admin/convert_to_encrypted.asp

You do not need it anymore.

Once you are positive every thing is running smoothly and everyone's passwords are ok you can go in and delete the "Old_Password" field as well.



If things didnt go well.. try again from scratch and go slowly.
If they still dont go well get ahold of us for help.

We are here to help, but if you really want us to we can be hired to do the conversion.

,

Hello- I am trying to install the ASPPROTECT product and tried to read all the docs but still am getting the following error:

[Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0x1980 Thread 0x1458 DBC 0x223c374 Jet'.

I understand about the physical path for the DSN-less connection and followed the example given. I got in touch with tech support for the host of my site and the give me the following as a physical path:

c:\sites\Single20\laptv1\database

Some observations:

1.- The database directory is outside the root dir but I think I am accounting for it with the path

2.- The permissions are ok

Any ideas?

Thanks

FP

 

,

Version 7 uses.. RC4

The upgrade process is described here in detail including a procedure to convert existing clear text passwords to the encrypted versions. (Your passwords will need to be clear text as the system shipped of course for the conversion to do its thing)

http://support.cjwsoft.com/code/info24.htm

It is also covered in the downloadbale docs
http://support.cjwsoft.com/code/moreinfo221-1.htm

Many people have done the upgrade without any issues and Version 7 is getting great feedback.

Should you decide to go with it there is upgrade pricing.
http://www.aspprotect.com/purchase_v7_upgrade_pricing.asp

,

How do I recover or reset admin password used for the aspprotected pages. I have installed it months and months ago, but now can not recall the password. Any help appreciated, as I do not feel like installing it again.

,

Ok time for some more questions!!!

Is there a way to make the person's email address their default username... or force it in somehow instead of allowing them to create their own?

, I would like to delete the SQL tables and set them up from scratch using enterprise manager and sql query manager and see what happens

If that is ok with you let me know.

Something is wrong like I said...  almost seems like the database is caching old password info from the field.,
I am having difficulty properly securing pdf's using 7.x
I used the example file and have been able to secure images and word docs, but the pdf's give users the error "There was an error opening this document. The file cannot be found."

The kicker -- it works fine on my computer, just not anyone else's. I put a link up to the same file without any security and that works on everyone's computer. The word file links and redirects work too. I've tried my log-in on other computers, then attempting to download the pdf and that doesn't work.

The client wants a site where users must register before downloading pdf's. They should be able to view all the pages without registering.

I don't know what I'm doing wrong. But I can't complete the site until this issue is resolved.

Help appreciated.


,

I just told you a lot of different things to try... and I doubt you have tried them in the time since I mentioned them

,

Parent paths being enabled on the server is a requirement of the application. That error means just what it says.

you can change all the server side includes to virtual includes that will work or you can ask you host to enable parent paths.. those are the options

more here...
http://support.cjwsoft.com/code/moreinfo5-1.htm

 

,

I recently upgraded my ASPclassifieds from MS Access to SQL.  The application launches, I can browse existing catagories, etc. but when I try clicking on the login, guestbook, register or accessing the classifieds_admin,  I get the HTTP 500 - Internal server error.  Guessing this must be a folder or file permission issue?  Have tried changing IUSR permissions but nothing helps.

Please advise.
Thanks, lancem

,

I think you may be using old code where that was an issue... I am going to PM you the latest version..

to be safe upgrade all the ASP files except the dataconn_inc.asp files and your config_inc.asp files

"be real careful not to lose your current encryption keys in the "config_inc.asp" file or you will be in real trouble

You can use your existing database

 

, I am sending you a PM with the new download url

see instructions above for what to do with it, Windows 2000 server you said ? Just checking on that one ?, If you have messed up the admin account or forgotten the admin password you generally should open up the database manually and add a new account or see what the old account is.

In version 7 however you have another option. Go through the installation instructions again. Specifically the part where you use the "get_me_in.asp" page to get back into the admin area by pasting in the password encrpytion keye you are using from your config file. , I dont what it is..u got to just keep trying stuff like connecting to different versions of the database and maybe even the version with no password set on it.. maybe do some iisresets in between if it is your server.. maybe try putting the database in a different folder

Usually people have zero trouble setting up this particular app because everything is so time tested and rock solid...

its just got to be something related to the actual data connection.. low level stuff ,

this could go on forever...

if you want PM "private message" me info to log into your site.. show me the pages we are dealing with...

and I will take a look at it all...

CJW

,

I have a very weird problem.  At the top of the page, where there used to be

[Place Ad] [Classifieds Home] [Register] [Sign In]

now there is only

[] [Classifieds Home] [Register] [Sign In]

so the words "Place Ad" have disappeared completely.  Can you please tell me which file in which folder would control this

,

I think you getting all confused about dsn's and what they really are.

A system dsn gets created via the ODBC control panel and gets listed there. A system dsn is nothing more than a registry entry telling information about where the database is an how to connect to it. Then every time code accesses the database it has to do a registry lookup. The whole process adds a lot of delays, causes very poor performance and is unnecessary.

A dsn-less connection simply connects directly to the database by specifying the driver being used, where the database is, and some other information like the password if there is one.

To get aspprotect or any other ASP application using a database all you have to do is make sure the database folder has correct permissions and then make a connection string like so. (with the correct info for your directory structure of course)

DBQ=c:\inetpub\wwwroot\aspprotect_6\data\database\ASPProtect _access2002.mdb;Driver={Microsoft Access Driver (*.mdb)};UID=Admin;Password=temp

If you are wondering Access databases always use the same username.

So, basically if permissions are set correctly and the directory is valid it will work.
It is really that simple. 99% of the time when people have problems it is one or the other.

That being said, don't worry about the odbc control panel and what is listed there for connections. All we really care about is that odbc drivers are installed and somewhat current.


One last thign for reference: even if you do make a system dsn the database folder still needs the correct permissions.

cwilliams38417.7371643518,

OK.  If no return page is set, do they end up on a PayPal confirmation page and have to navigate back to my site by going Back or typing the web address?

Nick

, The mass picyure import does not work like that. It involves no uploading component.

Only an admin can do a mass import on an album and they have to ftp the images into the site in that upload folder before they go do the mass import thing. ,

You can't do that. ASPProtect 7 does not work with ASP.NET.

It is a classic ASP application. As the web site states it can only be used to protect ".asp" pages written using vbscript.

ASP and ASP.net are completely different animals.

Thats why we have a .NET version.
http://www.aspprotect.com/more_info_net.asp

 

,

More info on the groups session variable.

Session("Groups") will contain the ID numbers of whatever groups the user is a part of.
It does not store the descriptive name of that group. It will show the same data that is actually stored in the "Groups" field in the database.

for example it might hold a value like this

*2*,*5*,*9*

meaning a user is part of groups 2, 5, and 9

so if you wanted to check to see if a user was part of a particular group you would do something like this

<%
If InStr(Session("Groups"),"*9*") Then
     Response.Write("You are a member of group 9")
End If
%>


Taking this even further, if you really wanted to get a particular group's name or description you would have to query the database like so. In this case we ask it the name and description for group 9.

 Group_ID=9
 Set ConnPasswords = Server.CreateObject("ADODB.Connection")
 ConnPasswords.Open ConnectionString
 Set cmdTemp = Server.CreateObject("ADODB.Command")
 Set CmdEditGroup = Server.CreateObject("ADODB.Recordset")
 cmdTemp.CommandText = "SELECT " & tbl_label_groups & ".* FROM " & tbl_label_groups & " WHERE (Group_ID = " & Group_ID & ")"
 cmdTemp.CommandType = 1
 Set cmdTemp.ActiveConnection = ConnPasswords
 CmdEditGroup.Open cmdTemp, , 0, 1
  
 Group_Name = CmdEditGroup("Group_Name")
 Group_Desc = CmdEditGroup("Group_Desc")

, Not the way it ships. You would have to add that functionality by editing the source code and database., I am really starting to get the hang of your software.  It seems to me, you have thought of everything a person could possible want.  Before I try to tackle setting up Pay Pal  subscription payments is there really any difference between a file include and a virtual include statement?  Is one more secure than another? , Oh, it does seem to put the photo in the correct directory.,

ALL FIXED.. tested with real paypal accounts and a live system
works perfectly

THIS FIX IS ONLY FOR PAYPAL SUBSCRIPTIONS

Download this file "ipn.asp" and put it in the "paypal_sub_signup" folder
2005-03-10_164645_aspprotect_subscription_fix.zip

Basically somehow an older version of the this file was in the original download archive.

I am VERY SORRY

Anyone who purchased ASPProtect 7 before March 11, 2005 should download this fix.

cwilliams38421.7018055556,

Upgrade from V6 to v7.x with an MSSQL SERVER DATABASE

1st of all, backup your existing ASPProtect files and database before performing this upgrade. Please be really careful while performing this upgrade. Version 7.x  is a highly advanced application compared to any previous versions. CJWSoft under no circumstances is responsible if you lose information or have website downtime.

BOTTOM LINE: (PERFORM THIS UPGRADE AT YOUR OWN RISK)

To do this upgrade you're going to need to have SQL Enterprise Manager and SQL Query Analyzer

That being said, on with the upgrade..


Open your SQL database in SQL Enterprise Manager

Regarding the following Tables

Rename "Users" to "ASPP_Users"
Rename "Groups" to "ASPP_Groups"

If you do not have a "Groups" table do not worry about it right now.

Now right click and DELETE the Config Table.
Yes, delete it..

Now, go into Design View for the "ASPP_Users" Table.

Rename the "Password" field to "Old_Password"
Be sure to spell it perfectly using the Underscore

If you have a "Groups" Field... leave it alone
If you do not have a "Groups" Field add one and make it a "nvarchar" field with a lengh of 255.

Now, we are going to add a few more new fields.

Add a field called "Redirection_URL" make it a "nvarchar" field with a lengh of 150.
Add a field called "PayPal_Subscriber_ID" make it a "nvarchar" field with a lengh of 100.
Add a field called "Newsletter" and make it a "bit" field
Add a field called "Password" and make it a "nvarchar" field with a lengh of 100.

Now close that window and save the changes..

Download these scripts.

2005-02-23_171110_aspprotect_v7_sql_upgrade_scripts.zip

Now open up SQL Query Analyzer
Connect to your SQL server.

Then load the script  "aspprotect_v7_config_table.sql" into the Query Analyzer.  Click the green play button at the top. If everything goes well the response should read something like this.

******************************************************
(1 row(s) affected)
******************************************************

Now, if you had a Groups Table your done with the database changes.

If you didnt have a groups table.

Then load the script  "aspprotect_v7_groups_table.sql" into the Query Analyzer.  Click the green play button at the top.

Now, go back to your database in Enterprise Manager and make sure all 3 tables are there and look ok. You might need to do a refresh or two to see them.

Now make sure an existing or new SQL user has (public / datareader / datawriter) permissions for all three tables. You reference this user in the asp code connection string so this user must be set up correctly. You may need your SQL server admins or hosting company to help you on this step as you may not have access to do this. You may not need to create a user and set permissions as the sql user you were logged in as to use query analyzer may by default get the correct permissions on anything you create.

Regardless, as you can see from this screenshot I have a SQL user called "aspprotectuser" and proceeded to set the permissions for that user. Under database access giving him (public,datareader, and datewriter permissions).


Now, you are done upgrading your SQL Server Database.

The existing passwords still have to be encrytped and moved from the "Old_Password" to the "Password" field

To that we have a special page we run in the application that will take care of that.

So, for now... go install the application, but using the database we just created.
Follow these instructions for the most part...
http://support.cjwsoft.com/forum/forum_posts.asp?TID=181& ; ;PN=1

When you get to the part where you finally get into the admin area and need to make an admin account you will notice that your existing user database is there but none of the users have passwords if you look at them in the edit screen.

That is normal. Simply do what the instructions say and create and admin account using a username that does not exist..

Then log off... then back in as that new admin account. If that works you are ready to convert the passwords.

This part is very easy.

You want to run a special page via the browser.

http://www.mysite.com/password_admin/convert_to_encrypted.asp

Replacing the part in blue with your website info.

Once you get the page running you will see a login prompt and one form field just like before with the "get_me_in.asp" page

You will need to paste the "PasswordEncryptionKey" value that you used in the "config_inc.asp" file in the form field and hit enter.

If all goes well you will see a page telling you to click here to encrypt the passwords and copy them over.

So do what it says... dont click more than once and wait.

Eventually it should say it is finished. So go log in to the admin area of the system using the new admin account.

Now edit some users but dont save... you want to see if the passwords are showing up. If they are the conversion worked. If you see nothing or a garbled mess it did not work and you made a mistake during this whole process.

If things went well backup and delete the conversion file below.

http://www.mysite.com/password_admin/convert_to_encrypted.asp

You do not need it anymore.

Once you are positive every thing is running smoothly and everyone's passwords are ok you can go in and delete the "Old_Password" field as well.



If things didnt go well.. try again from scratch and go slowly.
If they still dont go well get ahold of us for help.

We are here to help, but if you really want us to we can be hired to do the conversion.

,

Here are three known bugs and their fixes...

 

If you have any of these symptoms these fixes will most likely take care of them.
If you don't have a symptom do not make any changes as you most likely have an updated copy of the application.

Technically if you bought that app on or after April 27th 2004 these bugs should all have been corrected.

 

 

Description Fix

(no descriptions showing in pop up window)

 

Edit pic_window.asp with a text editor

 

Change

 

Set f=fs.OpenTextFile(Server.MapPath("pictures/Album_ID_" & Album_ID & ".txt"), 1)

 

To

 

Set f=fs.OpenTextFile(Server.MapPath("../pictures/Album_ID_" & Album_ID & ".txt"), 1)

 

 

Slideshow Fix…

(last image in slideshow it not showing)

 

In slideshow.asp

 

Change

 

<% For PicArrayIndex = 0 To Ubound(PicArray) - 1 %>

 

To

 

<% For PicArrayIndex = 0 To Ubound(PicArray) %>

 

 

Add To Favorites fix

(add to favorites feature doesn’t work at all)

 

Edit "album_uppermenu_inc.asp" in the scripts folder

 

Change

 

<a href="users/favorite_albums.asp?Album_ID=<% =Album_ID %>"><img border="0" src="<% =application("skinpath") %>add_to_favorites.gif"></a>

 

To

 

<a href="users/favorite_albums.asp?Album_ID=<% =Album_ID %>&Action=Add_To_Favorites"><img border="0" src="<% =application("skinpath") %>add_to_favorites.gif"></a>

cwilliams38104.7034375, I get the following message when trying to  look up the sysdiag.aspx and the default.aspx files. Why? I have followed all the install instructions.

Server Error in '/' Application.

Runtime Error

Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine.

Details: To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application. This <customErrors> tag should then have its "mode" attribute set to "Off".

<!-- Web.Config Configuration File -->

<configuration>
<system.web>
<customErrors mode="Off"/>
</system.web>
</configuration>

Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.

<!-- Web.Config Configuration File -->

<configuration>
<system.web>
<customErrors mode="RemoteOnly" defaultRedirect="mycustompage.htm"/>
</system.web>
</configuration>

cwilliams38454.4276388889,


Timecard Entry: 3/25/2006 1:50:18 PM

lunch, emails, Finished Gisco quarterly reports, ns2.gisco.net went down twice but came back up, false alarms, but checked to see if anything was wrong as well., Passport School, Installed Router, no Bell circuit yet., Going over to IMC. Diagnosing problems with the frame router. Talking with Andy., Entered bills , Setting up Dave V. waters laptop with Windows 2000, SQL, Office and IIS, More emerald billing issues, travel to albany from dutches co, LTI provisioning training, added ftp login for ogdensburgny.com web site, Started the staples order and then had to stop to send and receive emails for Paul's messages, Photo copy Watertown Chamber flyer, Eng Notebook, Talked to Robbie about a customer problem with House-Now.com, then called Crispin and Chris to check about it. Then I had to call the customer and tell him that we can't fix it. Then I had to listen to him yell at me., quiet till about 12....then KNI Utica went down...did a tracert on it and it stops at the imcnet frame...going to call seth to see if he has any ideas..., IsoAnalysis, Cleanup InterNIC, IPMonitor entries, wrestle WAN info out of Seth, Meet with Paul Barton, Administrative tasks (organizational, notekeeping, etc...), Steady Morning! Duties:Quality checking sign ups, cancellations, reports, callbacks from voicemail, checking billing emails, answering phone and taking sign ups. , Driving back from Madrid., inventory, email, voice mail, brochures, lunch, Took tech calls, and checked voice again, and DUI, and AUQ. , Job Fair, worked the show in albany. awesome!!!!!!!!!!!!!,

   Active Server Pages Rule The World
Contact Us  
All artwork, design & content contained in this site are Copyright © 1998 - 2019 PowerASP.com and Christopher J. Williams
Banner ads ,other site logos, etc are copyright of their respective companies.
STATS Unless otherwise noted - All Rights Reserved.

Active Server Pages help tutorial how to ASP Help ASP Tutorials ASP Programming ASP Code - ASP Free CJWSoft ASPProtect ASPBanner ASPClassifieds www.aspclassifieds.com, www.powerasp.com,www.cjwsoft.com,www.aspphotogallery.com,www.codewanker.com,www.aspprotect.com,www.aspbanner.com